Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home Volume XII January 2013 Feature Article: LED Lighting Tests: Maxspect Mazarra P and Aqua Illuminiation Vega

Feature Article: LED Lighting Tests: Maxspect Mazarra P and Aqua Illuminiation Vega

By Sanjay Joshi, Ph.D. Posted Jan 16, 2013 11:00 AM Pomacanthus Publications, Inc.
As LED lighting moves further into the mainstream, there is new effort being made to provide a fuller spectrum light that can be tuned by the aquarist to satisfy both the demands of the corals as well as the visual pleasure of the aquarist.

vegamaxspect2.jpg

New LED fixtures continue to be introduced into the hobby. Specifically, there is an increase in the number of LED fixtures providing a more fuller color spectrum with multiple channels of control, allowing the user more freedom in custom tuning the light output. Continuing in the same vein as my previous LED lighting tests, this article presents data on light intensity and spread along with spectral plots for several new LED fixtures. Table 1 presents a list of the LED lighting fixtures reviewed in this article. Each of these was tested using the same set up as my previous reflector tests, using a 3'X3' grid with a spacing of 3" in the X,Y direction. The fixtures were centered on this grid, and PAR was measured as PPFD (Photosynthetic Photon Flux Density) in micromoles/m2/sec using a LICOR 1000 data logger and a LI-192SA underwater cosine corrected sensor calibrated for both air and water. The data logger was set to average 5 readings for each data collection point. The data was imported into Microsoft Excel for analysis and the data was plotted to display the light spread and intensity at various distances. 4 plots of the data with 2 plots at each distance were generated showing:

  • A 3-D surface plot showing the actual PAR values recorded
  • A contour plot viewing the surface from the top showing the distribution

The spectral distributions were measured using the Licor LI-1800 spectroradiometer. The spectral data was collected from the various LEDs and normalized such that integrated light output (spectral irradiance) between the wavelengths of 400-700 nm was 100 Watts/m2. Data was collected at full power output for the individual channels of light control (eg. Blue, white) along with data with ALL LEDs on at full power. The data was normalized so that the full output was at 100 Watts/m2 over the wavelength range 400-700 nm. The various LED color outputs were then scaled by the same scale factor to allow of determination of the contribution of the various LEDs to the full output. The results are plotted as a Spectral power distribution plot.

Table 1: LED Lighting Fixtures Tested

LED Fixture

Picture

AquaIllumination: AI-Vega
table_1_ai_vega_picture.jpg
Maxspect

Mazarra-P

table_1_mazzara_p_picture.jpg

The fixtures were tested for light spread and intensity at 24"and 30", unless otherwise noted. Power draw was measured with a Kill-A-Watt meter.

Maxspect Mazarra P-series

The Mazarra P series is a modular lighting system that is sold as a complete unit with LED modules, frame mounts, power supply, and controller. The modular design allows for the addition of additional LED modules, on a support frame that is adjustable to fit a wide range of aquarium sizes. The mounting of the LED modules allows for sliding the location of the LED modules as well as allowing the LED modules to be mounted at an angle. The ability to adjust angular orientation allows for better control in directing the light output. It addition to the flexibility in mounting, this lighting fixture also allows for a plug and play replacement of the LED bulbs and the optics. 100, 70 and 40 degree optics come standard with the modules. The controller provides 4 dimmable channels, and each controller can control 16 LED modules. The LEDs used in each module are Cree XLamp XM-L, Philips Luxeon Rebel, Epileds Dual-Core, and Cree XLamp RP-G LED chips. As per the specification, each LED module is rated as 60W (4-Cree XLamp XM-L 7000-8000K @ 1500mA, 4-Philips Luxeon Rebel 460-490nm @ 1000mA, 4-Philips Luxeon Rebel 440-460nm @ 1000mA, 1-Epileds Dual-Core 400-410nm @ 1000mA, 1-Epileds Dual-Core 410-420nm @ 1000mA, and 2-Cree XLamp XP-G 3000K @ 1000mA).

image005.jpg
figure_1_mazzara_p_channels.jpg

Figure 1. Mazarra-P showing the arrangement of the different color LED in each cluster and the different channels of control

figure_2_mazzara_p_distribution.jpg

Figure 2 Mazarra-P single LED module Light Intensity and Distribution at 24" and 30"

figure_3_mazzara_p_spectral.jpg

Figure 3: Spectral Distribution of Mazzara-P

AquaIllumination AI - VEGA Color

The AI-Vega is the next generation LED light fixtures from Aqua Illumination. Compared to their previous products, popular AI-Sol and Sol-Blue, the AI Vega offers additional LED colors and 6 channels of control. Each LED fixture comprises the following LEDs:

  • 4-Cree XM-L Cool White
  • 4 - Cree XP-E Royal Blue
  • 4 - Cree XP-E Blue
  • 4 - OSRAM OSLON Deep Blue
  • 2 - Cree XP-E Green
  • 2 - OSRAM OSLON Deep Red

A wireless controller allows for infinite control of the 6 lighting channels to create a wide range of color combinations, along with programing in special effects such as clouds and lightning.

figure_4_ai_vega_led_arrangement.jpg

Figure 4 AI- Vega Showing the arrangement of the different color LEDs

figure_5_ai_vega_distribution.jpg

Figure 5 AI Vega Light Intensity and Distribution at 24" and 30"

figure_6_ai_vega_spectrum.jpg

Figure 6. AI Vega Spectral Distribution

Conclusions

As LED lighting moves further into the mainstream, there is new effort being made to provide a fuller spectrum light that can be tuned by the aquarist to satisfy both the demands of the corals as well as the visual pleasure of the aquarist. Hopefully this data will help the aquarist make an informed choice on what to expect from the individual LED fixtures and how best to utilize them to achieve the desired coverage and light intensity.

Document Actions
blog comments powered by Disqus
ADVANCED AQUARIST