The Klaes Aquarien Technik Protein
SkimmerThe
history of technological advancement in reef keeping seems marked by several years of
innovation followed by several more years of relative quiet. For years hobbyists had few
choices in protein skimming. One could use an air-stone driven skimmer or a venturi
skimmer. Then in the 1990s ETS introduced downdraft skimming to the hobby. The downdraft
skimmer generated renewed interest in protein skimming innovation and before long we
had a wide range of options including the downdraft, the MTC High Speed Aerator (HSA), and
the Euroreef skimmers, in additional to refined versions of the venturi skimmer.
The hobby seems to have
entered another quiet time in this technological punctuated equilibrium. There hasn't been
a successful introduction of a new protein skimmer to the hobby in a number of years. That
may be changing. The German Klaes series of "aspirating-venturi" skimmers is now
being imported into North America by Aquatic Dimensions http://www.klaeskimmer.com/. Many popular German
products have been imported into North America for some time. Tunze and Knop to name just
two have become household names in North American reef keeping circles. Klaes skimmers
have been around for well over a decade, and yet we are just beginning to see them on this
side of The Pond. At first glance one might be tempted to dismiss the Klaes as nothing
new. Most North American hobbyists have probably heard of the basic principles behind the
Klaes skimmer. It shares elements with the common venturi and air shredding skimmers, and
yet puts them together in a unique design that may reignite the skimmer debates that
characterized reef keeping in the 1990s.
Proud sponsor of this column
Figure 2: A small motor draws
air into the skimmer
A recirculating pump draws
air into the Klaes skimmer and then mixes it using a special impeller. In this regard the
principle of the skimmer is similar to the Euroreef skimmer. (For a look at the Euroreef
skimmer, see my review in Aquarium
Frontiers. The review includes a photo of the impeller.) The design of the Klaes
impeller is quite different from the Euroreef (figure 1). The impeller is a traditional
closed blade impeller with a series of holes drilled along the flat end of the
impeller assembly. An airline terminates close to these holes, and as the impeller spins,
air is drawn into the impeller and mixes with water (figure 2).
One of the biggest issues
with "air shredding" protein skimmers has been the reliability of the impellers.
The Euroreef as well as similar skimmers take a standard pump and modify the impeller so
that it draws air into the pump. To draw air into the pump and mix it sufficiently, the a
large part of the mass of the impeller has to be moved towards the outer rim of the
impeller. This has several consequences including premature failure of the impeller. While
reliability of the latest skimmers has improved, the method is not foolproof. The Klaes
design solves the problem by staying with the standard pump impeller and just drilling
holes in it.
Proud sponsor of this column
Figure 3: The complete Klaes
skimmer
The Klaes skimmer is
typical of German design, which is to say that it is very well built. The skimmer parts
are heavy gauge acrylic and plastic throughout. The skimmers have a high diameter to
height ratio, which is important. (For a more complete discussion of protein skimmer
principles, see my article on skimming in the 1999 issue of Marine Fish and Reef Annual.)
The three foot skimmer that I evaluated has an 8 inch diameter reaction chamber. Unlike
other skimmers, the collection cup is the same diameter as the reaction chamber. This
allows the Klaes to use a 3 inch collection neck and 3/4 gallon collection cup volume. The
collection cup itself is made of three parts for easy disassembly and cleaning. The
recirculating motor draws only 45 watts and is mounted directly to the side of the skimmer
for a compact design (figure 3).
One of the
most important design elements of foam fractionation is bubble contact time. Proteins,
heavy metals, and other materials that a protein skimmer removes are removed by coming in
contact with an air bubble that carries it away to the collection cup. One wants as many
bubbles in the contact chamber as possible and a bubble to remain in the chamber as long
as possible. (This is a simplification of a complex process. The references included in
the skimmer article mentioned above should be consulted for a more complete discussion of
the process.) The Klaes uses a counter-current design with water flowing down the reaction
chamber while bubbles rise through it maximizing reaction time. More importantly, the pump
used to mix air with the water is only a recirculation pump. A user supplied external pump
feeds the skimmer. Therefore it is the external pump and not the recirculation pump that
determines the flow through the skimmer. This is one of the most beneficial aspects of the
Klaes design. The air to water ratio can be maximized with this design. Most of the new
skimmer designs generate a fixed air/water mix, generally on the low side of ideal. Since
the flow through the Klaes can be slowed without reducing the air flow, one can generate a
high ratio of air to water flow.
Figure 4: The Euroreef impeller (l) compared to the standard
Eheim impeller
Another important
aspect of skimmer design is the size of the bubbles generated. One wants fine slowly
rising bubbles to maximize surface area and contact time. Air driven skimmers using wood
air-stones excel in this regard generating the smaller bubbles than any other design. Both
the MTC Power-Pro, a venturi skimmer, and the Euroreef skimmers produce bubbles nearly
rivaling an air-driven skimmer. The bubbles generated by the Klaes are similar in size to
the Power-Pro.
Today North American hobbyists have a
wide range of choices when considering a new protein skimmer. Given its quality of
workmanship, power efficiency, and effectiveness of the Klaes design, it is time to add
Klaes to this growing list.
